Viewing and updating Inventory
The Inventory displays a list of devices in the network along with the devices' current operational status.
To view the page, follow these steps:
| 1. | Click the tile on the HPE OfficeConnect Wi-Fi Portal home page or click > . |
| 2. | The page lists the APs and switches in the network and their operational status. Click an AP or switch to view the details of the device. |
The following table lists icons and their corresponding status:
Table 1: Device status
Status | Icon | Condition |
|---|---|---|
Up |
| Device is reachable. |
Down |
| Device is not reachable. |
Warning |
| Reachable device with a major alert reported by the device. |
Minor warning |
| Reachable device with a minor alert reported by the device. |
How do I add a device to the Inventory?
Adding a deviceTo add a device to the inventory list, follow these steps:
| 1. | Click the tile on the HPE OfficeConnect Wi-Fi Portal home page or click > . The page is displayed. |
| 2. | Click on the ) |
| 3. | The page is displayed. Follow the instructions in the Extending your network section. |
Switch integrationA switch is added to the Inventory list when it is discovered in the network by the cluster. The HPE OfficeConnect Wi-Fi Portal currently allows a maximum of four switches to be discovered and displayed in the page.
Was this information helpful?
Great! Thanks for the feedback.
Last Updated June 2018 © Copyright 2017 Hewlett Packard Enterprise Development. All Rights Reserved. | Contact |
